Skip to content
Test finger for active haptic feedback mounted on a robot arm

Human Experience / Test finger

Measuring haptic feedback as the finger feels it

The test finger for controls with active haptic feedback.

Enquire about the test finger

Test finger for active haptic feedback mounted on a robot.

Active haptics needs a measure of what we feel.

Active haptics is shaping the future of controls. As feedback is no longer tied to a fixed mechanical design, new possibilities emerge for designing and personalising the user experience. These possibilities also place greater demands on how haptic feedback is measured and evaluated.

The human finger perceives this feedback as acceleration. How strongly it is felt at the fingertip depends on the contact force and the finger’s frequency-dependent mechanical properties, known as mechanical impedance. Approaches based solely on laser displacement measurements at the control do not account for these parameters.

Our test finger for controls with active haptic feedback closes this gap.

Measurement

Reproducible measurements at the fingertip

The test finger simultaneously measures contact force and acceleration in all three spatial directions at its tip. Its conductive tip allows it to operate touch surfaces as a user would, without a software-controlled trigger for the haptic feedback.

The test finger meets the requirements of the Haptics Industry Forum (HIF). It provides a standardised measurement instrument that can serve as a shared reference for OEMs and suppliers.

F
Contact force
ax · ay · az
Acceleration in three spatial directions

Measured simultaneously at the fingertip.

Test finger with a conductive tip, housing and mounting flange
The test finger in detail: tip, housing and mounting flange.

Features

One instrument for development, validation and production testing

  • Finger-like behaviour

    Its frequency-dependent mechanical impedance matches that of a human finger. Its conductive tip can activate touch controls.

  • Multidimensional measurement

    Contact force and three-dimensional acceleration are measured simultaneously at the tip.

  • Ready for robotics

    The standard version can be mounted on robots with an ISO flange.

  • Straightforward integration

    Analogue outputs allow the test finger to be integrated into existing programmable logic controllers (PLCs).

Applications

A shared reference for OEMs and suppliers

OEMs

Verify requirements consistently

OEMs can use the test finger to verify that controls meet their requirements. By referencing the HIF in their specifications, they define a common measurement instrument. This makes results comparable across suppliers and projects.

Suppliers · Development

Quantify the effect of design changes

During development, suppliers use the test finger to track performance across different development stages and quantify the effect of modifications. Surfaces can be scanned in measurement series, revealing variations that remain hidden when only individual points are measured.

Suppliers · End-of-line

Verify performance in production

At the end-of-line tester, suppliers use the test finger to demonstrate that the active haptic feedback of manufactured controls meets the required performance. Analogue outputs allow it to connect to existing controllers, so testing can be integrated into established test-station workflows with little effort.

Let’s discuss your testing requirements.

From development and validation to production testing, we can help you determine how the test finger fits into your measurement and testing processes.

Enquire about the test finger